This product accepting installment payments
ออดิโออินเตอร์เฟส Tascam US-4X4HR มาพร้อมอินพุตไมโครโฟน XLR 4 ช่องและอินพุตสาย TRS 4 ช่อง (รองรับอินพุตกีต้าร์ 1-2) พร้อมด้วยการรองรับที่ 192 kHz
Mobile USB-C Audio/MIDI Interface from TASCAM
The TASCAM US-4x4HR USB-C audio/MIDI interface (PC/Mac/iOS) brings rich 192kHz audio, dependable 5-pin MIDI in/out, and super-low-latency tracking and monitoring to your home or mobile studio setup. The US-4x4HR's quartet of onboard Ultra-HDDA mic preamps give you 57dB of clean gain to capably drive most dynamic mics and onboard +48V phantom power to support your studio condensers. Each channel has a TRS input, gain knob, and signal and peak LED indicators. Additionally, Channels 1 and 2 give you impedance switches for direct input of guitars, bass, and other instruments. You also get MIDI in and out for interfacing with your keyboard controllers and drum machines. Perhaps best of all, the TASCAM US-4x4HR delivers all of these features over USB bus power — just a single USB-C cable (included) from your laptop to your interface is all you need for power and connectivity. As for monitoring, the TASCAM US-4x4HR gives a 1/4-inch headphone out and two sets of stereo 1/4-inch line outs, each with independent level controls so you can mix projects on loudspeakers or your favorite studio cans.
4 x Ultra-HDDA mic preamps
The TASCAM US-4x4HR gives you four Ultra-High Definition Discrete Architecture (Ultra-HDDA) mic preamps to capture audio with extremely low self-noise and home in on every detail in your musical performances. The US-4x4HR's four preamps open up the possibility of full-band live tracking and more detailed drum miking. Each channel also features a TRS jack, so you can easily track line-level soundboard sources alongside your microphones. And there are mic/line/instrument level switches on the front panel for Channels 1 and 2, so you can easily record a guitar or bass direct.
Supports sample rates up to 192kHz
Capturing audio in future-resistant 24-bit/192kHz quality is no problem when you've got the TASCAM US-4x4HR in tow. Higher sample rates means potentially greater top-end detail on vocals, acoustic guitars, and more.
High levels of latency — the time it takes for an audio interface to convert your analog signal to digital as it enters your computer and back again in the form of sound — can render even the best interfaces practically unusable. Fortunately, this is no concern with the TASCAM US-4x4HR. The latest drivers give you latency as low as four samples over its rock-solid USB-C connection. In other words, you can monitor yourself through headphones with no trace of delay as you pour your heart into a performance.
Software bundle included
Whether you're new to digital recording or not, the TASCAM US-4x4HR's included software bundle is a major value add. This bundle includes licenses to Cubase LE (Mac/PC) and Cubasis LE (iOS), two great platforms for capturing music on the move. Cubase LE provides a cutting-edge music production studio, giving users what they need to get started creating music. Cubasis LE is a compact version of Cubase for your iPad, providing the same look as its bigger sibling.
TASCAM US-4x4HR USB-C Audio/MIDI Interface Features:
- Mac, PC, and iOS compatible USB-C interface
- Sleek and modern design
- Rock-solid recording at home or on the road
- Captures audio in sample rates up to 192kHz
- Super-low latency — as low as 4 samples
- Bus powered — a single USB-C cable supplies power and connectivity from a laptop
- 4 x Ultra-HDDA microphone preamplifiers with 57dB of gain
- +48V phantom power for condenser microphones
- 1/4-inch TRS inputs on all four channels for capturing line-level signals
- Channels 1 and 2 have switchable impedance for recording guitar or bass
- 2 sets of stereo 1/4-inch line outputs feed your studio monitors
- 5-pin MIDI in/out for interfacing with studio controllers
- Headphone output with volume control provides zero-latency monitoring while you track
- Power supply included
- Includes licenses for Cubase LE and Cubasis LE