Synco Lav-S6M2

The Synco Lav-S6M2 is an omnidirectional lavalier microphone designed to provide improved speech clarity compared to your device's built-in microphone. The mic features a 3.5mm headphone jack for real-time monitoring and is well suited for interviews, video production, tutorials, and vlogs whether you shoot with a camera or a mobile device. This second-generation version offers input gain control and provides a low-cut filter along with additional processing to deliver improved sound with less noise than the original Lav-S6M. Thanks to its 3.5mm TRRS plug, the Lav-S6M2 can be used with smartphones, tablets, and other mobile devices, while a TRRS to TRS adapter is supplied for use with DSLR and mirrorless cameras. Additionally, a 3.5mm to 1/4" adapter is included to allow connection to an audio interface or a mixing console. The mic uses Synco's Mathematics Process Technique for enhanced audio quality with less noise and elevated detail. The in-line pod with the headphone jack also contains the power switch, low-cut filter, and gain adjustment over a 9 dB range. The Lav-S6M2 will run for up to 50 hours (30 hours when monitoring) on its built-in rechargeable lithium battery, which is recharged via the micro-USB port. The supplied clip ensures easy attachment to clothing such as a lapel, collar, or tie. Two foam windscreens are included for reduction of noise from breaths, light wind, and rustling of clothes. A USB charging cable and leather carrying pouch are also included.

• 9 dB of input gain control
• Mathematic Process Technique for noise supression and improved audio quality
• Low-cut filter rolls off frequencies below 150 Hz for clearer sound with less noise and rumbles
• Sensitive electret condenser capsule with 20 Hz to 20 kHz frequency range
• Omnidirectional polar pattern picks up sound from all directions
• 19.7' attached cable with 3.5mm TRRS male plug
• 3.5mm TRRS to 3.5mm TRS adapter for use with cameras
• Includes 3.5mm to 1/4" adapter for hookup to a mixer, a PA system, or an audio interface
• Integrated CVC noise reduction and Synco audio decoding technology enhance the mic's ability to capture detailed sound
• In-line 3.5mm headphone jack allows for real-time monitoring
• Includes two foam windscreens for attenuation of breath/wind noise
• Built-in rechargeable battery runs for 30 to 50 hours depending on monitoring
• Battery will operate for 1-hour on 10-minute charge, fully charges in 1.5 hours