Audioquest Golden Gate RCA-RCA (2M)

Availability: Out of Stock
2,200 THB

สาย RCA To RCA ขนาดความยาว 1 เมตร ที่อัพเกรดขึ้นจากรุ่น Evergreen  ด้วยตัวนำสายเป็นทองแดงคุณภาพ Solid Perfect-Surface Copper (PSC) ที่มีความบริสุทธิ์สูงขึ้น  ใช้ฉนวนเป็น Foamed-Polyethylene Insulation ที่ลดการสูญเสียและความเพี้ยนของสัญญาณ และยังใช้ชิลด์ Metal-Layer Noise-Dissipation System ( NDS ) ที่ช่วยลดสัญญาณรบกวน ( Noise ) ได้อย่างดีเยี่ยม

Purpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.

Since the beginning, AudioQuest has pioneered the use of superior metals, yet even we were surprised by the huge leap in performance attained through the astonishingly smooth and pure surface of Perfect-Surface Copper (PSC). PSC clearly outperforms previous AQ metals that cost over ten times as much. Proprietary metal-processing technology protects the wire's surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure, and smooth as possible, it becomes a wonderfully low-distortion conductor. In a conventional cable, electrical and magnetic interaction between strands is one of the greatest sources of distortion, often causing a somewhat harsh, dirty sound. Solid conductors are fundamental toward achieving Red River’s very clean, natural sound.

It's easy to accomplish 100% shield coverage. Preventing captured radio-frequency interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation. Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. Noise-Dissipation "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.

This plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability.
Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials.

Further information
More Information
Installment No
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account