MOTU รุ่น 828 MK3

รหัสสินค้า: 000058

รายละเอียด: Audio Interface แบบ Firewire ของ MOTU ใหม่ล่าสุด
10 analog in ที่ 192 kHz
16 แชนนอล ADAT digital I/O และ stereo S/PDIF
ใช้เป็น standalone mixer, ได้ถึง 28 in / 30 out
มี 2 ช่องด้านหน้าสำหรับ mic/guitar inputs พร้อมปรีแอมป์ คุณภาพสูง
CueMix FX

Specifications:

CueMix FX - flexible 28 input/16 bus mixer with on-board DSP effects, including reverb with sends/returns, plus EQ and compression on every input and output.
28 inputs / 30 outputs (at 44.1/48 kHz) - there's no channel sharing in the 828mk3; the mic inputs, S/PDIF I/O, headphone out and main outs are all handled as separate channels.
Front-panel control - access any setting in your entire 828mk3 mix directly from the front panel.
Stand-alone operation - program your mixes at the studio and then bring the 828mk3 to your gig - no computer needed. Need to tweak the mix? Do it on site using the back-lit LCD and front-panel controls.
Multiple CueMix FX mixes - for example, create different monitor mixes for the main outs and headphones. Or add send/return loops for outboard gear - with no latency.
Two front panel combo jacks provide hi-Z 1/4” guitar input or low-Z XLR mic input with phantom power, pad and plenty of gain.
Mic/guitar instrument sends - add your favorite outboard EQ, preamp, reverb or other processor to the two mic/guitar inputs, before the signal goes digital.
Clip protection - Mic/guitar input limiter prevents digital clipping and distortion from overloaded signal levels up to +12 dB over zero.
Eight 24-bit 192kHz analog inputs and outputs on balanced/unbalanced 1/4" TRS jacks
Precision Digital Trim - Digitally controlled analog trim on all analog inputs (mic/guitar inputs + quarter-inch TRS inputs) provides accurate adjustements in 1 dB increments. Fine-tune the balance of your analog inputs and then save/recall trim configurations.
Flexible optical I/O - 16 channels of ADAT lightpipe, 8 channels of SMUX (96 kHz) or two pairs of stereo TOSLink. Mix and match formats between the two banks.
Sample-accurate MIDI - connect a MIDI controller and/or sound module with no separate interface needed. MIDI I/O is sample-accurate with supporting software.
Expandable - add additional interfaces for more I/O as your needs grow.
Separate XLR main outs and front-panel headphone jacks, each with independent volume control.
Stereo 24